Specialist
Solution
Product
Document
Picture

Renovator / protector for plastics and paints on material used in the construction industry
GTS® is a product that provides prevention and cure. It allows quick and easy renovation and protection of plastics and paints on material used in the building industry.
GTS® revives the original colour of all plastics and paints affected by weather conditions. It ensures the protection of material against splashes from concrete, mortar and coatings.
Thanks to its anti-adherent properties, GTS® makes daily cleaning of equipment easy.
Can be used on the backs of vans, hoppers, gutters, flaps, rails, runners etc. Ideal for plying to concrete pumps, building site equipment, metallic casing (faces looking inwards), wooden casing etc...
  • Revives the greying over time.
  • Limits adherence of concrete and mortar.
  • Makes cleaning easier.
  • Long-lasting effect.
  • Non-corrosive.
  • Application: Microfibre cloth, low-pressure atomised with Viton joint 2 bars pressure, shortnap roller or brush for acrylic varnish.
  • Wiping: Microfibre cloth.
Clean tools and equipment used with white spirit immediately after use.
  • Apply the product to a clean, dry surface free of dust and grease (moisture content less than 5% by mass).
  • In case of use of a cleaner, rinse thoroughly until the surface is free from any trace of cleaning product and completely dry.
  • Shake the package thoroughly before use and use the pure product: do not dilute or mix with another product.
  • Carry out a preliminary test on a small area.
Step 1: Apply
  • Apply in one thin and regular layer.
  • Do not overload the support; all of the product must penetrate the surface.
Step 2: Wipe
  • After 10 minutes, the treated material must be wiped off and polished with a lint-free microfibre cloth.
  • Drying protected: 24 hours.
  • Physical state at 20°C: Liquid.
  • Colour: Colourless.
  • Odour: Characteristic.
  • pH: NA.
  • Flash point: 40°C.
  • Boiling point [°C]: 180°C.
  • Density: 1.03 ± 0.02.
  • Water solubility [vol/vol]: None.
  • COV: < 160 g/l*.
Consumption depends on the nature of the support. The following values are given for information: 30 to 40m2/Kg.
  • Can of 0,25 and 5 Kg.
  • 200 kg drums.
  • 1000 kg IBC containers.
  • Store in a dry place at a temperature between 5°C and 30°C.
  • Storage: 12 months from date of manufacture, in original packaging unopened.
  • Always handle the product in an aerated area. Otherwise, wear an ABEK-type mask.
  • For perfect application and effective protection, GTS® must be shaken and used when the temperature of the supports is above 10°C and below 30°C.
  • Do not apply in rainy or very hot weather.
  • The ideal air temperature is between 10°C and 30°C.
  • Respiratory protection: Wear an ABEK-type mask.
  • Protection of hands: Wear fluoride rubber gloves.
  • Protection of skin: Wear suitable safety clothing.
  • Protection of eyes: Wear hermetic protective goggles (ref. standard EN 166).
  • If swallowed: Do not induce vomiting. Contact a doctor or specialist.
Chemical nature
Polysiloxane mixture.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 73
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.915
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other