Wax and biodegradable adhesive residue stripper
Guard Remover® Eco Floor Wax is a powerful new-generation ecological stripper designed for stripping waxes and acrylic emulsions used for flooring. It can also be used to remove marks and residues of adhesives or foams used for carpets, linoleum and PVC floor coverings (neoprene, double sided, polyurethane, vinyl adhesive etc.)
Its special formula removes multiple adhesives and layers of wax in a single application. Its neutral pH allows a protective product to be applied afterwards without the need to rinse and neutralise, thus greatly reducing stripping time.
Guard Remover® Eco Floor Wax has been designed to meet the varying requirements of applicators in terms of safety during application, effectiveness, impact on the environment and respect for the treated surfaces.
It is a pH-neutral stripper that requires no labelling (no hazard symbol). Soda-free, potash-free and containing no ethylene glycol ethers (butyl glycol, methyl diglycol, etc.), it does not have the drawbacks of traditional alkaline strippers (classed as corrosive, requiring neutralisation and numerous rinsings, hazardous to the user and to the environment, etc.).
Guard Remover® Eco Floor Wax is harmless to glass and metal and produces no corrosion.
  • Powerful stripper more effective than hazardous alkaline or basic products.
  • No neutralisation required. Soda and potash-free.
  • Non-hazardous to user and environment.
  • Non corrosive and non-irritating.
  • Can be used on all substrates with no major impact (metals, glass, rubber, etc.).
  • Economical: dilution up to 1 volume of product per 19 volumes of water.
  • Quick and easy to use.
  • When diluted, ideal for stripping Decorative Concrete Guard Finish.
Apply with a mop.
Tools and equipment should be cleaned with water immediately after use.
  • It is essential to do tests beforehand, particularly to verify colour behaviour and any effects on the substrate.
  • Shake the product well before use.
Stripping of waxes: 
  • Dilute the product to 5% or 10% in water depending on the condition of the floor or the number of coats of emulsion to be removed.
  • Apply this solution generously to the surface.
  • Leave to act for 5 to 10 minutes.
  • Strip with a floor buffer fitted with a black disc.
  • Remove the saturated solution with a wet vacuum cleaner.
  • Finish off with a damp sweep using clean water to remove residues.
Stripping of adhesives: 
  • Pull up the carpet or plastic flooring in pre-cut strips. Use a blade designed specially for this purpose.
  • Apply the product to the surface to be stripped with a sprayer.
  • Leave to act for about from 10 to 60 min without allowing the product to dry. The length of time will vary depending on the type of adhesive and thickness to be stripped.
  • Remove the residues with a painter’s knife or spatula.
  • Wait for several days before laying a new covering.
  • For coverings that are difficult to pull up, lift up about 30cm at one corner, pour in the product and leave to act for several hours until loose.
  • Physical state at 20°C: Liquid.
  • Colour: Pale yellow.
  • Odour: Slight.
  • pH: 6 ± 0.5.
  • Temperature at which stable: -5°C to +50°C.
  • Boiling point [°C]: NC.
  • Relative density: 1.05 ± 0.01.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
Coverage depends on the number and quality of coats to be stripped. The following values are for guidance only:
  • Stripping of waxes: 6 to 20 m2/kg.
  • Stripping of adhesives: 4 to 10 m2/kg.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 48 months from date of manufacture, in original unopened can.
Ecological and respects the environment:
  • Water-based product.
  • Soda-free and potash-free.
  • No ethylene glycol ethers.
  • Safe and non-toxic.
  • Biodegradable > 90%*.
  • VOCs < 1 g/l*.
  • For best results it is essential that Guard Remover® Eco Floor Wax is used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply during rain or in very hot weather. Air temperature between 5°C and 30°C.
  • Do not use on wood flooring, cork, linoleum or painted surfaces.
  • Do not allow to dry.
  • Do not mix with another product.
  • Breathing protection: No breathing protection equipment is required under normal use conditions with suitable ventilation.
  • Hand protection: Wear household rubber gloves.
  • Skin protection: Wear protective long-sleeved clothing to protect the skin.
  • Eye protection: Wear protective goggles.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF REACH OF CHILDREN 
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 54
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.159.649